How To Install Window Blinds In Dover

Numerous Dover homeowners choose window blinds when they need more privacy and management over natural light in their properties. They’re a functional and cost-effective window covering. Skilled DIYers could also secure them in a couple of steps. However, nothing beats the ease of working with a qualified window treatment installer. Here are the fundamental steps of installing window blinds and when you ought to contact the professionals to complete it for you.

Get Measurements And Mark Everything Precisely

Prior to beginning, determine if you need inside-mount blinds or outside-mount. This vital detail will let you know where to measure. Get measurements of the height, width, and depth within your frame for inside-mount installations. When attaching outside-mount blinds, measure the height and width of your window, which includes the trim, and add three inches to each measurement to make sure you have good coverage. Measure exactly–refrain from rounding up or down. Improperly measured blinds won’t operate correctly.

Order Your Blinds

Once you know your dimensions, you are ready to choose your blinds. You probably know what kind of blinds you want. Buy blinds that are as near to your measurements as possible. Ready-made blinds might not fit precisely, either extending out too far or not getting to the edge of the window entirely. Make sure you have hardware that permit you to hang the blinds at the appropriate depth, as well. You should order tailor-made blinds and hardware for a perfect fit.

Install Your Window Blinds

Your blinds may come with instructions. Adhere to them to install your particular product. If you want a preview of how difficult it is to install window blinds in Dover, here are several general steps to give you a better understanding.

 

Inside Mount Blinds

 

1. Put a bracket on the top of the window’s frame approximately one inch from the outer edge. Ensure this spot won’t interfere with the blind’s operating mechanisms. Use a pencil to mark the bracket holes.
2. Drill pilot holes in the indicated areas.
3. Align the bracket holes with your pilot holes and fasten with screws.
4. Repeat these first three steps for the second bracket.
5. Place the end caps onto the top rail of your blinds. Slide the rail into the brackets.

Connect the tilt wand and check it. In addition, evaluate the pull cord.

Outside Mount Blinds

1. Decide if you’re attaching to the wall surrounding the window or the window trim. Grasp the headrail and make certain the blind covers the lower edges of the window.
2. Mark each end of the headrail.
3. Measure four inches from both headrail marks and mark your bracket holes here.
4. Drill pilot holes on your marks.
5. Line up the brackets with the pilot holes and fasten with screws on both sides.
6. Slide the headrail into the brackets.

Connect the tilt wand and try out everything to ensure it works.

Pick The Simplest Way To Install Blinds 

Just a reminder, you aren’t required to install blinds yourself. The easiest way to install window blinds in Dover is to hire an expert window treatment installer. They will work with you every step of the way. They’ll help you pick blinds that match your needs and preferences, make accurate measurements for a custom product, and put them up for you. They guide customers daily, so they’ll handle your job swiftly and accurately. They’ll know how to diagnose any challenges without spending hours trying to find help on websites. A window treatment expert will also have a higher quality of blinds than large retail outlets or online marketplaces.

Avoid The Trouble And Hire Sunburst Shutters To Install Your Window Blinds In Dover

Getting new window blinds in Dover couldn’t be more effortless when you consult with Sunburst Shutters Delaware. We’ll help you choose made-to-order blinds that will fit your windows perfectly, and our skilled installation team will affix them for you. All you must do is dial 301-835-1611 or submit the form below to schedule a free in-home consultation.